Zyxel GS1900 switch zero-day: why the June patch was not enough
Attackers hijacked Zyxel GS1900 office switches through a new flaw that bypassed June's fix. Which models are affected and what to do now.
Network switches rarely get attention in a small office. They sit in a closet or under a desk, connect the PCs, printers and access points, and keep working for years. That is exactly why a new Zyxel flaw matters: attackers have been taking over Zyxel GS1900 switches, and the patch many owners installed in June did not stop them.

What happened
On November 3, 2026, Zyxel published a security advisory for CVE-2026-107441, an out-of-bounds write in the CGI program of the GS1900 series firmware. Zyxel says it could let an unauthenticated attacker on the network run operating system commands on the switch with a crafted HTTP request. Researchers at Binarly reported it.
The background is unusual. In September, GreyNoise reported a campaign that had compromised close to 1,000 GS1900 switches and linked it to an older bug, CVE-2026-7273, which Zyxel had patched on June 16. According to BleepingComputer, Binarly then found the attackers' exploit and confirmed it still worked against switches running the June fix: it targeted a separate weakness. Once inside, the attackers collected device configurations, hashed administrator credentials and network details. SecurityWeek reports that they also deployed malware on the devices. Zyxel's corrected firmware was released in late October.
Which switches are affected
Zyxel lists ten models: GS1900-8, GS1900-8HP, GS1900-10HP, GS1900-16, GS1900-24, GS1900-24E, GS1900-24EP, GS1900-24HPv2, GS1900-48 and GS1900-48HPv2. On every model, the fixed firmware is version 2.90 patch 3, shown as 2.90(xxxx.3)C0. Anything ending in .2)C0 or earlier is vulnerable, including switches that were updated in June.
Why a switch matters
A compromised switch sees traffic between every device plugged into it. Its configuration can reveal how the network is laid out, which segments exist and what passwords are reused. For an attacker, it is a quiet foothold that no antivirus product on your PCs will ever scan.
What to do now
- Find out what switches you have. Look at the label on the front or underside of each switch in your office, closets and any branch locations. "GS1900" in the model name means this applies to you.
- Check the firmware version in the switch's web interface. If it is not 2.90 patch 3, download the update from Zyxel's support site for your exact model and install it. Plan for a short network outage while the switch restarts, ideally out of hours.
- Change the admin password. Small-office switches are often left on the factory login. Since attackers took credential hashes from compromised devices, set a new, unique password on every switch, even after patching, and do not reuse it elsewhere.
- Restrict who can reach the management page. Ideally only an IT administrator's computer or a dedicated management network can open it, and it is never reachable from the internet or the guest Wi-Fi.
- If a switch behaved oddly (unexpected reboots, configuration changes, unknown accounts), treat it as possibly compromised: reset it to factory settings, install the new firmware, then rebuild the configuration rather than restoring an old copy blindly.
How we can help
If you are not sure what is in your network closet, our network setup and management service can inventory switches, firewalls and access points and keep their firmware current, and patch management covers the devices people forget. Our earlier article on outgrowing a home-style router explains how to separate office, guest and device networks. Call (213) 986-4855.